Under Guiding, you will find mechanical and optical accessories that support the tracking control of an astronomical mount. These are mainly guidescopes and off-axis guiders.
Omegon
Guidescope Microspeed guide scope, 60mm
$ 179.00
Omegon
Guidescope module finder
$ 99.00
Omegon
Microspeed guidescope, 50mm
$ 159.00
Omegon
Finder Plate for 108/600 Quintuplet APO
RRP:
$ 69.00
Our price:
$ 49.90
Omegon
Off-Axis-Guider with microfocus
$ 209.00
Omegon
Finder Plate for 72/400 Quintuplet APO
RRP:
$ 49.90
Our price:
$ 39.90
Omegon
Off-Axis-Guider Advanced T2
$ 139.00
Omegon
guide scope mount
$ 229.00
Askar
Off-Axis-Guider T2/M48/M54
$ 290.00
Omegon
guide scope ring clamps
$ 149.00
Omegon
Basic Guiding rings 105 mm
$ 29.90
Motorised astronomical mounts compensate for the effect of celestial rotation on the telescope. This way, the telescope remains aligned to a selected object for hours at a time. For this to work, the mount must be positioned precisely. For example, the right ascension axis of an equatorial mount must point as precisely as possible to the celestial pole.
In astrophotography, however, it is not enough to set up the mount as precisely as possible. Depending on the exposure time, the mount’s mechanical inaccuracies may become noticeable. The longer the exposure time, the greater the effect. The mount’s operation must be constantly monitored and corrected. For this purpose, guiding accessories such as a guidescope with guidescope rings or an off-axis guider are required.
If the correction of the mount is done automatically, it is known as autoguiding. For this, you need a camera which continually sends control pulses to the mount over a feedback loop. Suitable cameras can be found here in the category astro-cameras.
The image shows a guidescope mounted parallel to the telescope. The blue camera is aligned with a guide star. It sends control pulses to the mount via a connected computer.